Take a fresh look at your lifestyle.

How to Patch an Air Mattress


If your air mattress leaks, you can patch it with various adhesives and materials. You can use Gorilla glue, Aquaseal FD, or Tenacious Tape. These materials are inexpensive and easy to find at home improvement stores. You can even find vinyl air mattress patches from manufacturers such as Camco.

Tenacious Tape

If your air mattress has a hole, you can repair it using the Tenacious Tape. This tape is made of a special adhesive that clings to the fabric. The glue is strong and durable so it will last the life of your air mattress. It’s easy to apply and reposition the tape if needed.

The tape can also be used to repair other items. It has a stronger adhesive than most duct tapes and is designed to create a permanent bond to fabrics. It comes in a variety of sizes and colours. One type is ripstop nylon, which is better for tents or inflatables. The other type is made of TPU plastic and is best for thick fabrics or other materials that are exposed to the sun.

Aquaseal FD

If your air mattress or sleeping pad leaks, you can easily patch it with the Aquaseal FD Repair Kit. This waterproof adhesive cures to form a flexible, durable seal. It is ideal for repairing leaks on inflatable sleeping pads, air mattresses, and camp beds.

Aquaseal FD Repair Adhesive is clear, waterproof, and flexible, making it the perfect solution for repairing items with a wide range of motion. It also comes with a Cure Accelerator, which can shorten the cure to two hours.

After the adhesive has cured, apply the patch. It is important to apply the patch with an overlapping technique and to smooth out any air bubbles. Afterwards, inspect the patch to ensure that there is no leak. If the leak persists, repeat the process.

Aquaseal FD is a clear waterproof urethane adhesive designed to repair all types of outdoor gear. Besides, air mattresses can also be used to repair waders and drift boats. Its excellent abrasion resistance makes it an ideal choice for all repairs.

Camco’s Vinyl Air Mattress Patches

If you’re experiencing leaks in your air mattress, you can use contact cement to patch it up. You can use a heavy book or weight to help apply the patch to the mattress. Then, let the patch dry for about two to three hours.

Once the patch is dry, you can re-inflate the bed and apply the talc. To make sure the patch sticks, you may need to press the patch firmly against the hole to ensure that the glue sticks. You can also wipe away excess glue.

The first step is to locate the leak. You may want to use a dish soap and water solution if you have a large hole. Make sure you don’t spray the solution through the air mattress, which may make the hole larger. To avoid causing further damage to the mattress, clean the area with a damp cloth.

Gorilla glue

Gorilla glue is a polyurethane-based adhesive that bonds quickly and effectively with many materials, including air mattresses and inflatables. The adhesive can be used to patch or seal air mattresses and other inflatables, and it can also be used to create decorative wall coverings. The adhesive is highly flexible and easy to work with.

When repairing air mattresses, you’ll need to use a flexible patch that overlaps the hole. Several adhesives are available, including super glue and contact cement. However, you’ll have to allow the adhesive to dry fully before you can use it on your air mattress.

A fabric patch is another option. A piece of fabric, like a piece of felt, can be cut to fit the hole and sewn on. A clear liquid adhesive, such as Loctite Vinyl, Fabric, and Plastic Flexible Adhesive, is also an excellent option. It bonds the fabric or felt to the air mattress’ surface and dries clear and waterproof.