How to Get Rid of Rust on Your Clothes

The best way to get rid of rust on your clothes is to wash them. To do this, you can use lemon juice and water. Lemon juice has an excellent acidic effect and helps to remove rust from your clothes. However, you must ensure that you do not dry out the lemon juice, as it will worsen the rust.

Baking soda

You can try a solution made of baking soda and vinegar to remove rust. This mixture will effectively remove all forms of rust. In addition, it is an environmentally friendly solution that you can use on several items. The solution is robust but can be applied with a soft cloth.

Vinegar

You can use vinegar to get rid of rust by soaking any metal item in it for a while. The vinegar will loosen up the rust and make it easier to clean. Aside from vinegar, you can also use baking soda or hydrogen peroxide.

Salt

Salt is an excellent natural cleaner that can be used to remove rust. You can mix salt with lime juice to make a paste. Rub the rusted surface with the paste. Leave the paste for at least a few hours and rinse with water. You can use steel wool or a scouring pad if the rust is severe. However, this method will require more work.

Naval Jelly

People have been using Naval Jelly for decades to remove rust from metal surfaces. It consists of a chemical solution made up of water and various chemicals. The mixture contains Xanthan gum, which gives the solution a jelly-like consistency. This gum also prevents the gel from dripping off metal surfaces. The result is a pink, viscous gel that dissolves rust.

Oxalic acid

Oxalic acid is a powerful rust-removal chemical that can be safely applied to metal surfaces. If necessary, you can soak the metal item for as long as 24 hours. Although the acid can be hazardous to your health, it is a quick and effective way to remove rust.

Naval Jelly dissolves rust.

Loctite Naval Jelly Rust Dissolver is a heavy-duty rust treatment that removes rust and bluing from metal surfaces. It is especially suitable for heavily rusted items.

Scrubbing rusty surface

There are several effective ways to remove rust from a surface. The first method is to make a paste using baking soda and water. It should be thick enough to stick to the surface. Then, you can scrub the paste off with steel wool or a wire brush. Repeat this process as needed. If the paste doesn’t work, try using a different method, such as soap and water.

Using abrasive tools

When you have rust on your tools, you may be unable to remove them with traditional methods. But you can use abrasive tools to remove rust, which can accommodate this process. These tools can be as simple as a wire brush or coarse grit sandpaper. Of course, you should wear protective gear and be careful when using abrasive tools. Another excellent option for removing rust on a metal surface is a chemical rust remover.